SAF ZİRKONYUMUN MİKROARK OKSİDASYON YÖNTEMİYLE OKSİT ESASLI SERAMİK KAPLANMASI

Yücel GENÇER, Mehmet TARAKÇI, Sezgin CENGİZ
2.469 686

Öz


Bu çalışmada, saf zirkonyumun yüzeyi mikroark oksidasyon yöntemi ile sabit elektriksel şartlarda ve aynıelektrolit kompozisyonunda 5, 15, 30, 45, 60, 90 ve 120 dakika süreyle kaplanmıştır. Zr üzerinde oluşturulankaplamanın faz kompozisyonu, mikroyapısı, yüzey morfolojisi ve mikrosertliği; X-ray kırınımı, taramalıelektron mikroskobu, profilometre ve mikrosertlik ölçümü ile karakterize edilmiştir. Kaplama tabakası gözenekliyapıda olup, önemli miktarda mikro çatlaklar içermektedir. Kaplamanın kristal yapıdaki monoklinik (m-ZrO2) vetetragonal (t-ZrO2) zirkonyum oksit fazlarından oluştuğu ve kaplama süresinin oluşan faz içeriğini etkilemediğitespit edilmiştir. Kaplama içerisinde zirkonyum ve oksijenin yanında silisyumun varlığı da tespit edilmiştir.Kaplama süresindeki artışla beraber kaplama kalınlığı doğrusal şekilde 5 μm’den 135 μm’ye yükselmiştir. Yüzeypürüzlülüğü kaplama süresi ile artarak, 0,5 μm’den 6,4 μm’ye yükselmiştir. Altlık malzeme zirkonyumun 200HV sertliğine karşılık, oksit kaplama tabakası sertliği yaklaşık 600 HV olarak ölçülmüştür ve mikrosertlikdeğerinde kaplama süresine bağlı sistematik bir değişim görülmemiştir.

Anahtar kelimeler


Mikroark oksidasyon, zirkonyum, zirkonyum oksit, seramik kaplama

Tam metin:

PDF


Referanslar


Xue, W., Deng, Z., H. Chen, Ma,, Zhang R. T.,

Microstructure and phase composition of microarc

oxidation coatings formed on Ti-6Al-4V alloy in

aluminate solution, Surface Eng, 17, 323-326,

Yerokhin, A.L., Nie, X., Leyland, A. Matthews, A.,

Dowey, S.J., Plasma electrolysis for surface

engineering, Surf Coat Tech, 122, 73-93, 1999.

G.L. Yang, X.Y. Lu, Y.Z. Bai, Z.S. Jin,

Characterization of microarc oxidation discharge

process for depositing ceramic coating, Chinese

Phys Lett, 18, 1141-1143, 2001.

Yerokhin, A.L., Snizhko, L.O., Gurevina, N.L.,

Leyland, A., Pilkington, A., Matthews, A., Spatial

characteristics of discharge phenomena in plasma

electrolytic oxidation of aluminium alloy, Surf

Coat Tech, 177, 779-783, 2004.

Wu, X.H., Qin, W., Guo, Y., Xie, Z.Y., Selflubricative

coating grown by micro-plasma

oxidation on aluminum alloys in the solution of

aluminate-graphite, Appl Surf Sci, 254, 6395-

, 2008.

Sundararajan, G., Krishna, L.R., Mechanisms

underlying the formation of thick alumina coatings

through the MAO coating technology, Surf Coat

Tech, 167, 269-277, 2003.

Krishna, L.R., Purnima, A.S., N.P. Wasekar, G.

Sundararajan, Kinetics and properties of micro arc

oxidation coatings deposited on commercial Al

alloys, Metall Mater Trans A, 38A, 370-378,

Verdier, S., Boinet, M., Maximovitch, S., Dalard,

F., Formation, structure and composition of anodic

films on AM60 magnesium alloy obtained by DC

plasma anodising, Corros Sci, 47, 1429-1444,

Liang, J., Guo, B.G., Tian, J., Liu, H.W., Zhou,

J.F., Liu, W.M., Xu, T., Effects of NaAlO2 on

structure and corrosion resistance of microarc

oxidation coatings formed on AM60B magnesium

alloy in phosphate-KOH electrolyte, Surf Coat

Tech, 199, 121-126, 2005.

Sun, X.T., Jiang, Z.H., Yao, Z.P., Zhang, X.L., The

effects of anodic and cathodic processes on the

characteristics of ceramic coatings formed on

titanium alloy through the MAO coating

technology, Appl Surf Sci, 252, 441-447, 2005.

Krishna, L.R., Somaraju, K.R.C., Sundararajan, G.,

The tribological performance of ultra-hard ceramic

composite coatings obtained through microarc

oxidation, Surf Coat Tech, 163, 484-490, 2003.

Yerokhin, A.L., Shatrov, A., Samsonov, V.,

Shashkov, P., Pilkington, A., Leyland, A.,

Matthews, A., Oxide ceramic coatings on

aluminium alloys produced by a pulsed bipolar

plasma electrolytic oxidation process, Surf Coat

Tech, 199, 150-157, 2005.

Liang, J., Guo, B.G., Tian, J., Liu, H.W., Zhou,

J.F., Xu, T., Effect of potassium fluoride in

electrolytic solution on the structure and properties

of microarc oxidation coatings on magnesium

alloy, Appl Surf Sci, 252, 345-351, 2005.

Martini, C., Sabatini, G., Ceschini, L., Williams,

J.A., Hutchings, I.M., Improving sliding and

abrasive wear behaviour of cast A356 and wrought

AA7075 aluminium alloys by plasma electrolytic

oxidation, Mater Design, 31, 816-828, 2010.

Nie, X., Meletis, E.I., Jiang, J.C., Leyland, A.,

Yerokhin, A.L., Matthews, A., Abrasive

wear/corrosion properties and TEM analysis of

Al2O3 coatings fabricated using plasma

electrolysis, Surf Coat Tech, 149, 245-251, 2002.

Chen, F., Zhou, H., Zhang, Q.F., Lv, F.X., Friction

and Wear of the Ceramic Coating Formed on

Magnesium Alloy, Advanced Tribology, 467-470,

Li, J., Bai, X.D., Zhang, D.L., Li, H.Y.,

Characterization and structure study of the anodic

oxide film on Zircaloy-4 synthesized using NaOH

electrolytes at room temperature, Appl Surf Sci,

, 7436-7441, 2006.

Han,Y., Yan, Y.Y., Lu, C.G., The effect of

chemical treatment on apatite-forming ability of

the macroporous zirconia films formed by micro arc oxidation, Appl Surf Sci, 254, 4833-4839,

Good, V., Widding, K., Hunter, G., Heuer, D.,

Oxidized zirconium: a potentially longer lasting hip

implant, Mater Design, 26, 618-622, 2005.

Uchida, M., Kim, H.M., Miyaji, F., Kokubo, T.,

Nakamura, T., Apatite formation on zirconium

metal treated with aqueous NaOH, Biomaterials,

, 313-317, 2002.

Xue, W.B., Zhu, Q.Z., Jin, Q., Hua, M.,

Characterization of ceramic coatings fabricated on

zirconium alloy by plasma electrolytic oxidation in

silicate electrolyte, Mater Chem Phys, 120, 656-

, 2010.

Miyake, M., Uno, M., Yamanaka, S., On the

zirconium-oxygen-hydrogen ternary system, J Nucl

Mater, 270, 233-241, 1999.

Setoyama, D., Yamanaka, S., Phase diagram of Zr-

O-H ternary system, J Alloy Compd, 370, 144-

, 2004.

Uchida, M., Kim, H.M., Kokubo, T., Tanaka, K.,

Nakamura, T., Structural dependence of apatite

formation on zirconia gels in a simulated body

fluid, J Ceram Soc Jpn, 110, 710-715, 2002.

Kobayashi, A., Shanmugavelayutham, G., Yano, S.,

Microstructural characterization and properties of

ZrO2/Al2O3 thermal barrier coatings by gas tunneltype

plasma spraying, Vacuum, 80, 1336-1340,

Chaim, R., Zhitomirsky, I., GalOr, L., Bestgen, H.,

Electrochemical Al2O3-ZrO2 composite coatings on

non-oxide ceramic substrates, J Mater Sci, 32,

-400, 1997.

Leushake, U., Krell, T., Schulz, U., Peters, M.,

Kaysser, W.A., Rabin, B.H., Microstructure and

phase stability of EB-PVD alumina and

alumina/zirconia for thermal barrier coating

applications, Surf Coat Tech, 94-5, 131-136, 1997

Pauporte, T., Finne, J., Kahn-Harari, A., Lincot, D.,

Growth by plasma electrolysis of zirconium oxide

films in the micrometer range, Surf Coat Tech,

, 213-219, 2005.

Ohki, M., Hwu, T.C., Mutoh, T., Thermal cycle

damage of wear-resistant ceramic coatings, T

Indian I Metals, 53, 135-140, 2000.

Han, Y., Yan, Y.Y., Li, D.C., Huang, J.J., Lian, Q.,

Effect of NaAlO2 concentrations on microstructure

and corrosion resistance of Al2O3/ZrO2 coatings

formed on zirconium by micro-arc oxidation, Appl

Surf Sci, 256, 6359-6366, 2010.

Hobbs, L.W., Rosen, V.B., Mangin, S.P., Treska,

M., Hunter, G., Oxidation microstructures and

interfaces in the oxidized zirconium knee, Int J

Appl Ceram Tec, 2, 221-246, 2005.

Han, Y., Yan,Y.Y., Structure and bioactivity of

micro-arc oxidized zirconia films, Surf Coat

Tech, 201, 5692-5695, 2007.

Han, Y., Yan, Y.Y., Lu, C.G., Zhang, Y.M., Xu,

K.W., Bioactivity and osteoblast response of the

micro-arc oxidized zirconia films, J Biomed

Mater Res A, 88A, 117-127, 2009.

Liu, L., Liu, Z., Chan, K.C., Luo, H.H., Cai, Q.Z.,

Zhang, S.M., Surface modification and

biocompatibility of Ni-free Zr-based bulk metallic

glass, Scripta Mater, 58, 231-234, 2008.

Klapkiv, M.D., State of an electrolytic plasma in

the process of synthesis of oxides based on

aluminum, Mater Sci+, 31, 494-499, 1995.

Wei, T.B., Yan, F.Y., Tian, J., Characterization

and wear- and corrosion-resistance of microarc

oxidation ceramic coatings on aluminum alloy, J

Alloy Compd, 389, 169-176, 2005.

Xue, W.B., Deng, Z.W., Lai, Y.C., Chen, R.Y.,

Analysis of phase distribution for ceramic coatings

formed by microarc oxidation on aluminum alloy,

J Am Ceram Soc, 81, 1365-1368, 1998.

Yerokhin, A.L., Lyubimov, V.V., Ashitkov, R.V.,

Phase formation in ceramic coatings during plasma

electrolytic oxidation of aluminium alloys, Ceram

Int, 24, 1-6, 1998.

Mcpherso, R., Formation of Metastable Phases in

Flame-Prepared and Plasma-Prepared Alumina, J

Mater Sci, 8, 851-858,1973.

Wu, H.H., Jin, Z.S., Long, B.Y., Yu, F.R., Lu,

X.Y., Characterization of microarc oxidation

process on aluminium alloy, Chinese Phys Lett,

, 1815-1818, 2003.




Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.