AA2024 ALAŞIMINDA SIMA YÖNTEMİ İLE TİKSOTROPİK YAPI ÜRETİMİ ÜZERİNE YENİDEN ISITMA SICAKLIĞININ ETKİSİ

Neşet AKAR
1.342 372

Öz


Bu çalışmada, bir dövme alüminyum alaşımı olan AA2024 alaşımında gerinimin neden olduğu sıvı aktivasyonu(strain induced melt activated-SIMA) yöntemi ile yarı-katı şekillendirme için gerekli tiksotropik mikroyapıüretimi araştırılmıştır. Bu amaçla ekstrüze halde AA2024 alaşımı %20 oranında soğuk deformasyona tabitutulmuş ve takiben %30, %40 ve %50 sıvı oranına karşılık gelen yarı-katı sıcaklıklara ısıtılarak oda sıcaklığınasahip suda soğutulmuştur. Mikroyapı analizleri metalografik inceleme ve nicel ölçüm yöntemleri ile yapılmıştır.Deneysel sonuçlar, SIMA yöntemiyle AA2024 alaşımında, yarı katı şekillendirme için gerekli olan küreselşekilli tiksotropik mikroyapıların üretilebileceğini göstermiştir. Artan yarı-katı sıcaklıkla tane boyutu artarkenşekil faktöründe belirgin bir değişim gözlenmemiştir. SIMA yöntemi ile tiksotropik yapı üretimi için yarı-katısıcaklıklarda izotermal bekletmeye gerek olmadığı tespit edilmiştir.

Anahtar kelimeler


Yarı-katı şekillendirme, Yarı-katı sıcaklık, AA2024 alaşımı, Tiksotropik yapı, SIMA.

Tam metin:

PDF


Referanslar


Spencer, D.B., Mehrabian, R. and Flemings,

M.C., “Rheological Behavior of Sn-15 pct Pb in

the Crystallization Range”, Metallurgical

Transaction A, 3A:1925-1932 1972.

Flemings, M.C., Riek R.G. and Young K.P.,

“Rheocasting”, Materials Science and

Engineering, 25:103-117 1976.

Zoqui, E.J., Paes, M., Es-Sadiqi, E., “Macro- and

microstructure analysis of SSM A356 produced

by electromagnetic stirring” Journal of

Materials Processing Technology, 120: 365–

2002.

Tzimas, E., “Evolution of microstructure and

rheological behavior of alloys in the semi solid

state”, Ph.D. Thesis, Drexel University, USA,

-12 1997.

Kapranos, P., Ward P.J., Atkinson H.V. and

Kirkwood D.H., “Near net shaping by semi-solid

metal processing” Materials and Design, 21

(4): 387-394 2000.

Li, D. N., Luo, J. R., Wu, S. S., Xiao, Z. H.,

Mao, Y. W., Song, X. J., Wu, G. Z., “Study on

the semi-solid rheocasting of magnesium alloy

by mechanical stirring”, Journal of Materials

Processing Technology, 129 (1-3): 431-434

Hirt, G., and Kopp, R., “Semi-solid Metal

Processing” WILEY-VCH Verlag GmbH &

Co, Weinheim 2009.

Czerwinski F. “Semisolid Processing—Origin of

Magnesium Molding”, Magnesium Injection

Molding, Springer US, USA, 81-145 2007.

Abramov, V. O., Abramov, O. V. Abramov, B.

B. Straumal and W. Gust, “Hypereutectic Al-Si

based alloys with a thixotropic microstructure

produced by ultrasonic treatment”, Materials

and Design, 18: 323-326 1997.

Taghavi, F., Ghassemi, A., “Study on the effects

of the length and angle of inclined plate on the

thixotropic microstructure of A356 aluminum

alloy”, Materials and Design 30:1762–1767

Liu, D., Atkinson, H.V., Kapranos, P.,

Jirattiticharoean W. and Jones, H.,.

“Microstructural evolution and tensile

mechanical properties of thixoformed high

performance aluminium alloys”, Materials

Science and Engineering A, 361 (1-2): 213-224

Nafisi, S., Lashkari, O., Ghomashchi, R.,

Ajersch, F., Charette, A., “Microstructure and

rheological behavior of grain refined and

modified semi-solid A356 Al–Si slurries”, Acta

Materialia, 54: 3503–3511 2006.

Doutre, D, Hay, G., Wales, P. and Gabathuler,

J.P. “SEED: A new process por semi solid

forming”, Canadian Metallurgical Quarterly,

(2): 265-272, 2004.

Birol Y., “Internal Cooling to produce

aluminium alloy slurries for rheocasting”,

Journal of Alloy and Compounds, 480 (2):

-368 2009.

Birol Y., “Production of Al-7Si-0.3Mg slurry for

rheocasting via internal cooling of the melt

below liquidus temperature”, Metallic

Materials, 47 (9): 401-407 2009.

Martinez, R.A. and Flemings, M.C., “Evolution

of particle morphology in the semisolid

processing”, Metallurgical and Materials

Transactions A, 36 (8): 2205-2210 2005.

Atkinson, H.V., Liu, D., “Microstructural

coarsening of semi-solid aluminium alloys”,

Materials Science and Engineering A, 496 (1-

:439-446 2008.

Young, K.P., Curtis, P.K. and James,.C., “Fine

Grained Metal Composition”, United States

Patent, Patent No: 4415374, USA 1983.

Sirong, Y., Dongcheng, L., Kim, N.,

“Microstructure evolution of SIMA processed

AA2024”, Materials Science and Engineering

A, 420 (1-2):165-170 2006.

Choi, J. C., Park, H. J. “Microstructural

characteristics of aluminum 2024 by cold

working in the SIMA process.” Journal of Materials Processing Technology, 82: 107–116

Kopp, R., Winning G. and Möller T.,

“Thixoforging of aluminium alloys” METEC,

Düsseldorf 1999.

Jung, H.K. Kang C.G. “Reheating process of

cast and wrought aluminum alloys for

thixoforging and their globularization

mechanism”, Journal of Materials Processing

Technology, 104: 244-253 2000.

Guo, H., Yang, X.,” Preparation of semi-solid

slurry containing fine and globular particles for

wrought aluminum alloy 2024” Trans.

Nonferrous Met. Soc. China 17: 799-804 2007.

Akar, N., Mutlu, I., “Effect of Predeformation

Rate in SIMA Process on Thixotropic Structure

of AA2024 Aluminium Alloy”, Journal of The

Faculty of Engineering and Architecture of

Gazi University, 25(4): 663-670 2010.

Chayong, S., Atkinson, H.V. and Kapranos, P.,

“Multistep induction heating regimes for

thixoforming 7075 aluminium alloy”, Materials

Science and Technology, 20 (4): 490-496 2004.

Figueredo, A., “Science and technology of semisolid

metal processing” North America Die

Casting Associtation, USA, 1-17, 2001.

Tzimas, E. and Zavaliangos, A., “Evaluation of

volume fraction of solid in alloys formed by

semisolid processing”, Journal of Materials

Science, 35 (21): 5319-5329 2000.

Zoqui E.J. “Morphological analysis of SSM Al–

5 wt.% Cu measured by the rheocast quality

index”, Journal of Materials Processing

Technology, 143–144: 195–201 2003.

Jiang, H., Lu, Y., Huang, W., Li, X., Li, M.,

“Microstructural evolution and mechanical

properties of the semisolid Al–4Cu–Mg alloy”,

Materials Characterization, 51: 1– 10 2003.

Jiang, H., Li, M., “Microscopic observation of

cold-deformed Al–4Cu–Mg alloy samples after

semi-solid heat treatments”, Materials

Characterization, 54: 451– 457 2005.

Jiang, H. and Li, M., “Grain growth of Al-4Cu-

Mg alloy during isothermal heat treatment”,

Journal of University of Science and

Technology Beijing, 13(1): 67-72 2006.

Jiang, H., Mi, Z., Tang, D., and Li, M.,

“Microstructure evolution of Al-4Cu-Mg alloy

during semi-solid treatment”, Journal of

University of Science and Technology Beijing,

(2): 151-156 2007.

Wang, S., Li, Y., Chen, W., Zheng, X.,

“Microstructure evolution of semi-solid 2024

alloy during two-step reheating process”,

Transactions of Nonferrous Metals Society of

China, 18 (4): 784-788 2008.

Atkinson, H.V., Kapranos, P., Liu, D., Chayong

S.A. and Kirkwood D.H. Thixoforming of

normally wrought aluminium alloys”, Materials

Science Forum, 396-402 (3): 131-136 2002.

Atkinson, H.V., “Modelling the semisolid

processing of metallic alloys”, Progress in

Materials Science, 50 (3): 341-412 2005.

Fan, Z., “Semisolid metal processing”

International Materials Reviews, 47(2): 49-85

Zhang, L., Liu, Y.B., Cao, Z.Y., Zhang, Y.F.,

Zhang, Q.Q. “Effects of isothermal process

parameters on the microstructure of semisolid

AZ91D alloy produced by SIMA”, Journal of

Materials Processing Technology, 209: 792–

2009.

Verhoeven, J.D., “Fundamentals of physical

metallurgy”, John Wiley & Sons Inc., Canada,

, 200, 347 1975.

Porter, D.A., and Easterling K.E. “Phase

transformation in metals and alloys” CRC

Press, UK, 131 2001.

Kim, N.S. and Kang, C.G., “An investigation of

flow characteristics considering the effect of

viscosity variation in the thixoforming process”,

Journal of Materials Processing Technology,

: 237-246 2000.

Birol, Y., “Thermomechanical processing of

AA6061 billets for semi-solid forming”,

International Journal of Materials Research,

(1): 53-59, (2007).

Atkinson, H.V., Burke K. and Vaneetveld G.,

“Recrystallization in the semi-solid state in 7075

aluminium alloy”, Materials Science and

Engineering A, 490 : 266-276 2008.

Önsel, M., “The influence of heating conditions

on semi-solid forming of aluminum alloys”,

Yüksek Lisans Tezi, Boğaziçi Üniversitesi Fen

Bilimleri Enstitüsü, İstanbul, 90 2005.




Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.